Indoor Signage (Display Signage)

3/16” White Foamboard is lightweight, rigid, and easily cut polystyrene foam clad with outer facing paper and white backing. Most common for rigid display signage (A-Frame/Easel signage)

3/16” Black Foamboard is lightweight, rigid, and easily cut polystyrene foam clad core with outer facing paper and black backing. Most common for shorter-term rigid display signage (A-Frame/Easel signage)

3/16” Black Gatorboard is a lightweight, durable, mounting board with dense polystyrene foam clad core with outer facing wood-fiber veneer and black backing. Most common for long-term rigid display signage (A-Frame/Easel signage)

3/16” White Gatorboard is a lightweight, durable, mounting board with dense polystyrene foam clad core with outer facing wood-fiber veneer and white backing. Most common for long-term rigid display signage (A-Frame/Easel signage)

Gloss is a high sheen/semi-reflective/shiny finish, best suited for heavy color saturation.

Satin is a medium sheen/slightly-reflective/shiny finish, best suited for photos and supports heavy color saturation.

Matte is a sheen-less/non-reflective/flat finish, best suited for materials with intention to be written on or for presentation under direct light.

Gloss - high sheen/reflective/shiny, heat applied, durable plastic coating to both sides of the print (encapsulation). Allows the print to be cleaned with any antibacterial or Windex equivalent solution. If a lip is applied, the print will also be water/weatherproof.

Matte - sheen-less/non-reflective/flat finish, heat applied, durable plastic coating to both sides of the print (encapsulation). Allows the print to be cleaned with any antibacterial or Windex equivalent solution. If a lip is applied, the print will also be water/weatherproof.

Dry Erase - high sheen/reflective/shiny, heat applied, durable plastic coating to both sides of the print (encapsulation). Allows the print to be cleaned with any antibacterial or Windex equivalent solution. If a lip is applied, the print will also be water/weatherproof.

Grommets are ½” collared, reinforced, eyelet holes punched through the substrate in all corners and every 2 feet for longer widths for easy hanging

Velcro strips are generally cut up to 2” in length and applied to the corners and across select widths for easy hanging. The adhesive backing on the Velcro is rather strong and is NOT advised for application to painted drywall as this may damage the paint when removed. If applying to painted drywall or equivalent, use shorter-term and remove with a Un-Do (adhesive remover) or similar